如何对路由重发布？

大 中 小  文章来源：万象互联 更新时间：2012-9-14 17:48:45
分享：

路由重发布配置代码如下：

Router>en

Router#conf

Configuring from terminal, memory, or network [terminal]?

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#host R4

R4(config)#int lo4

%LINK-5-CHANGED: Interface Loopback4, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback4, changed state to up

R4(config-if)#ip add 192.168.4.1 255.255.255.0

R4(config-if)#no shut

R4(config-if)#exit

R4(config)#int s0/1/0

R4(config-if)#ip add 192.168.45.4 255.255.255.0

R4(config-if)#clock rate 56000

R4(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/1/0, changed state to down

R4(config-if)#exit

R4(config)#router rip

R4(config-router)#net 192.168.4.0

R4(config-router)#net 192.168.45.0

R4(config-router)#end

%SYS-5-CONFIG_I: Configured from console by console

R4#

 

 

 

Router>en

Router#conf

Configuring from terminal, memory, or network [terminal]?

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#host R5

R5(config)#int s0/1/1

R5(config-if)#ip add 192.168.45.5 255.255.255.0

R5(config-if)#no shut

R5(config-if)#

%LINK-5-CHANGED: Interface Serial0/1/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1, changed state to up

R5(config-if)#exit

R5(config)#int s0/1/0

R5(config-if)#ip add 192.168.56.5 255.255.255.0

R5(config-if)#clock rate 56000

R5(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/1/0, changed state to down

R5(config-if)#exit

R5(config)#router rip

R5(config-router)#net 192.168.45.0

R5(config-router)#redistribute eigrp 4567 metric 10

R5(config-router)#exit

R5(config)#router eigrp 4567

R5(config-router)#net 192.168.56.0

R5(config-router)#redistribute rip metric 1544 20000 255 1 1500

R5(config-router)#end

%SYS-5-CONFIG_I: Configured from console by console

R5#

 

 

Router>en

Router#conf

Configuring from terminal, memory, or network [terminal]?

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#host R6

R6(config)#int s0/1/1

R6(config-if)#ip add 192.168.56.6 255.255.255.0

R6(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/1/1, changed state to up

R6(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1, changed state to up

R6(config-if)#exit

R6(config)#int s0/1/0

R6(config-if)#ip add 192.168.67.6 255.255.255.0

R6(config-if)#clock rate 56000

R6(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/1/0, changed state to down

R6(config-if)#router eigrp 4567

R6(config-router)#net 192.168.56.0

R6(config-router)#

%DUAL-5-NBRCHANGE: IP-EIGRP 4567: Neighbor 192.168.56.5 (Serial0/1/1) is up: new adjacency

R6(config-router)#redistribute ospf 4567 metric 1544 20000 255 1 1500

R6(config-router)#exit

R6(config)#router ospf 4567

R6(config-router)#net 192.168.67.0 0.0.0.255 area 0

R6(config-router)#redistribute eigrp 4567 subnets

R6(config-router)#end

%SYS-5-CONFIG_I: Configured from console by console

R6#

 

 

Router>en

Router#conf

Configuring from terminal, memory, or network [terminal]?

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#host R7

R7(config)#int lo7

%LINK-5-CHANGED: Interface Loopback7, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback7, changed state to up

R7(config-if)#ip add 192.168.7.1 255.255.255.0

R7(config-if)#no shut

R7(config-if)#exit

R7(config)#int s0/1/1

R7(config-if)#ip add 192.168.67.7 255.255.255.0

R7(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/1/1, changed state to up

R7(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1, changed state to up

R7(config-if)#exit

R7(config)#router ospf 4567

R7(config-router)#net 192.168.7.0 0.0.0.255 area 0

R7(config-router)#net 192.168.67.0 0.0.0.255 area 0

R7(config-router)#end

%SYS-5-CONFIG_I: Configured from console by console

R7#

00:02:39: %OSPF-5-ADJCHG: Process 4567, Nbr 192.168.67.6 on Serial0/1/1 from LOADING to FULL, Loading Done

文章来源：http://www.hulian.top，转载请注明！

 


版权说明:本站原创文章,由万象互联SEO优化发表.
本文地址:https://www.hulian.top/zixun/post/5187.html
分享到：QQ空间新浪微博腾讯微博微信百度贴吧百度空间搜狐微博
在线咨询
  • 在线时间
  • 8:00-21:00